01262 424900

Brush plates are an ideal way to bring cables through walls and make good the hole through which they emerge at the same time. The aperture is wide enough to allow fully terminated cables to pass through for connection directly to a TV or other device. The ability to pass the cables directly through the brushes means that unnecessary terminations and connections at a dedicated AV faceplate are eliminated, making for a faster installation and less chance of a poor connection. The faceplates can be screwed to a standard electrical back box or simply attached directly to the wall. The brush aperture is large enough for HDMI plugs, VGA plugs and network cables etc. to pass through.

This brush faceplate is finished in brushed stainless steel and is available as single or double gang. This double gang brush plate measures 146mm x 86mm and is 2mm deep. The aperture for the brushes measures 100mm x 50mm.

Please note that in order to comply with building regulations, when used in compartment walls this product must be installed in conjunction with a back box. Measures must also be taken to reinstate the fire performance of the original wall and to protect against the spread of fire, by the use of fire resistant pads or other such methods. In order to comply with electrical regulations it is not advisable to mix mains and other low voltage cables with signal/AV cables in the same back box without mechanical separation.

Associated Products