EZ RJPRO HD Crimp Tool RJ45 RJ11 RJ12 Network Tool 100054
- Genuine Platinum Tools EZ RJPRO HD crimp tool with 100054C part number.
- Compatible with both RJ45 and RJ11/12 connectors.
- Crimps EZ RJ45 Cat5e or Cat6 connectors to ethernet network cable.
- Features a one-step operation that clamps and trims conductors.
- Also performs stripping and cutting actions with additional blades.
- Ideal for professional use in data centers and network installations.
- Genuine Platinum Tools crimpers recommended for optimal performance.
- Ergonomic handle for comfortable grip during extended use.
EZ RJPRO HD Crimp Tool 100054
The Platinum Tools 100054C EZ-RJPRO HD crimp tool is an exceptional tool for crimping EZ-RJ45 connectors to ethernet network cables. It has a built-in cutter and stripper, and can crimp both RJ45 and RJ11/12 connectors. This versatile tool clamps the connector to the cable and trims off the excess conductors in one simple action. The blade also provides precise stripping and cutting actions.
This crimp tool is compatible only with genuine EZ RJ45 Cat5e, cat6, and shielded Cat5/6 connectors from Platinum Tools. These connectors allow the conductors to be pushed and pulled all the way through the connector, enabling the engineer to verify the correct color sequence before crimping. The twists of the conductors can be preserved as far as possible into the connector, enhancing electrical performance.
With its ergonomic design and comfortable grip, this crimp tool is perfect for extended use. It accepts cable with an outer diameter of up to 6.98mm (when used with unshielded Cat6 connectors), and the maximum diameter of the inner conductors including the insulation is 1.016mm. Contacts are gold plated for enhanced conductivity and durability.
Whether you're a professional installer or a DIY enthusiast, this crimp tool is a must-have for your networking toolkit. It produces consistent, reliable results every time and saves you time and effort. Order your Platinum Tools 100054C EZ-RJPRO HD crimp tool today and experience the difference it makes.
The EZ RJ45 System
The EZ RJ45 system simplifies twisted pair terminations by allowing the wires to be inserted all the way through the EZ connector and out the front. This allows the technician to easily verify the proper wiring order prior to crimping, saving time and reducing waste. Electrical performance of the termination is optimized by pulling the EZ RJ45 connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves the performance of the EZ RJ45 connectors.
Applications
The EZ-RJPRO HD Crimp Tool uses the EZRJ45 patented 'crimp & trim' system and will handle most cable sizes including heavy duty and cables with larger dimensions. The maximum outer diameter for cable to use in the EZ RJ45 system is 6.6mm and the maximum conductor outer diameter is 1mm.
For larger cables, you will need to go outside of the EZ RJ45 range, see our shielded CAT6A connectors (450302) or two-part CAT6 connectors (450305).
